Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of a Peugeot 5008 MK1

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Door trim panel

Let's see how to remove the inner panel from the front door of a Peugeot 50058 MK1: first, we need to remove the window switch by taking off the cover located near the internal door handle: underneath it, there is a Torx T20; let's unscrew it and with a plastic tool, pry at the sides of the switch plate and lift it, disconnecting the electrical connectors and removing the cover from the door handle, which is usually secured only with clips. Below, we will find two more Torx T20 screws: one near the mirror and one towards the bottom of the door. Let's unscrew them, then if there is one, let's also remove the courtesy light by disconnecting the electrical connector located behind it. Let's detach the door panel, secured by plastic clips, by inserting a plastic tool and working our way along the entire perimeter; now we can gently slide it off the guide. If there are any other electrical connectors, let's disconnect them. The panel is now free.

Posted on 11 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Peugeot 5008
How to Remove the Door Panel of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) To remove the door panel of the Peugeot 5008, you need to loosen the bolts that secure the panel in its housing: these are located just below the arm…
Where to Find the OBD2 Port in the Peugeot 5008
Where to Find the OBD2 Port in the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) If you want to access the data from the ECU of your first-generation Peugeot 5008, you need to know where the OBD2 port is located to connect a diagn…
Where to Find the Cabin Fuse Box of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this guide, you will find a brief and simple procedure to gain access to the cabin fuse box of your first-generation Peugeot 5008. First, open the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos