Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Peugeot 5008

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Headlight bulb

The following instructions will allow you to remove and replace the dipped or main beam bulb of the front headlight on a Peugeot 5008. First, open the car's bonnet and start by removing the plastic cover behind the headlight; then disconnect the bulb holder along with the bulb, removing and replacing it with a new one (of the correct type and with the same fitting). At this point, check the operation of the dipped bulb after connecting it, finally securing the plastic protective cap.

Posted on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 5008
How to replace the front headlight bulb of the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Today we will see how to replace the headlight bulb of the Peugeot 5008 model 2. To perform the replacement of the bulb, we must purchase a 55 Watt h…
How do you replace the front headlight bulb of the Peugeot 5008?
How do you replace the front headlight bulb of the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In order to replace the headlight bulb of the Peugeot 5008, you need to open the hood so that you can access the components inside the engine compart…
Replacing the Front Headlamp Bulb on the Peugeot 5008
Replacing the Front Headlamp Bulb on the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Here are the steps necessary to remove and replace the front headlamp bulb on the Peugeot 5008. First, open the bonnet of your car and start by remov…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos