Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Peugeot 5008

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

Below are the instructions on how to remove and replace the rear bumper of the Peugeot 5008. First, move to the rear of the vehicle and start unscrewing all the fastening screws found on both sides of the rear wheel arches; open the boot lid and unscrew the upper and lower screws, gently detaching the bumper from the sides until it is completely removed (disconnecting the electrical connector of the light), as shown in the video.

At this point, replace or repair the bumper, refitting it onto the bodywork.


Posted on 4 September 2026 by ScegliAuto


Related tutorials

Guide to Removing the Front Bumper on the Peugeot 5008
Guide to Removing the Front Bumper on the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this video tutorial, learn how to remove and replace the front bumper on the Peugeot 5008, as well as the 3008. First, open the bonnet and start r…
How to Replace the Rear Fog Light Bulbs of the Peugeot 5008
How to Replace the Rear Fog Light Bulbs of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this guide, learn how to replace the rear fog light bulbs of the Peugeot 5008. First, move to the rear of the car and disconnect the bulb cable of…
How do you reset the AdBlue light on the Peugeot 5008?
How do you reset the AdBlue light on the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In order to reset the AdBlue warning light of the Peugeot 5008, you need to go and add the necessary amount of additional fluid into the correspondin…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos