Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Rear bumper

To replace the rear bumper on a Peugeot 308, open the boot lid and remove the side internal trim to access the upper fixing bolts, then unscrew them. Move to the rear wheel arches and remove the screws and clips connecting the bumper to the splash guards. Under the car, also unscrew the lower screws along the edge. Once all fixings are released, pull the bumper outward starting from the sides to detach it from the side guides. Disconnect any connectors for the parking sensors or rear fog lights before completely removing it. Fit the new bumper by following the reverse order.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Peugeot 308
How to Remove the Rear Bumper from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper from a Peugeot 308, start with the rear wheel arches: push the trim inward and unscrew the Torx screws present on both side…
How to remove the rear bumper of the Peugeot 308
How to remove the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The removal of the rear bumper on Peugeot 308 vehicles may seem like a difficult task to do independently, but on T 9 models it is easier than you mi…
How to Remove the Rear Bumper on a Peugeot 308
How to Remove the Rear Bumper on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Removing the rear bumper on a Peugeot 308 is a fairly simple operation: first, open the boot and unscrew the plastic nuts that secure the rear lights…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos