Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper on a Peugeot 308 is a fairly simple operation: first, open the boot and unscrew the plastic nuts that secure the rear lights. Beneath them, you will find screws and clips to rotate 90°, which secure the upper part of the bumper.

Remove the fabric covers that conceal the wheel arches to access the screws that secure the bumper to the wings, then position yourself under the vehicle to remove the screws and plastic clips that hold the lower part of the bumper. Insert a flat screwdriver into the gap between the bumper and the bodywork and release the side clips on both sides.

At this point, the bumper is free, but remember to disconnect the electrical connectors for the parking sensors and the rear camera.


Posted on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Peugeot 308
How to Remove the Rear Bumper on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of …
How to Remove the Rear Bumper of the Peugeot 308?
How to Remove the Rear Bumper of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Let’s see, with the help of this video guide, how to remove the rear bumper of the mentioned vehicle, keeping in mind that the participants in the af…
How do you remove the front bumper on a Peugeot 308 2014?
How do you remove the front bumper on a Peugeot 308 2014?
Peugeot 308 (2013-2021 / T9, MK 2) To remove the front bumper of a Peugeot 308, start by lowering the vehicle and removing the front wheels to facilitate access to the screws. Usually,…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos