Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Rear bumper

See other generations:
Video tutorial

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present.

Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the Peugeot 308?
How to Remove the Rear Bumper of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Let’s see, with the help of this video guide, how to remove the rear bumper of the mentioned vehicle, keeping in mind that the participants in the af…
How to remove the rear bumper of the Peugeot 308
How to remove the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The removal of the rear bumper on Peugeot 308 vehicles may seem like a difficult task to do independently, but on T 9 models it is easier than you mi…
How to Remove the Rear Bumper from a Peugeot 308
How to Remove the Rear Bumper from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper from a Peugeot 308, start with the rear wheel arches: push the trim inward and unscrew the Torx screws present on both side…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos