Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear bumper of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Rear bumper

The removal of the rear bumper on Peugeot 308 vehicles may seem like a difficult task to do independently, but on T 9 models it is easier than you might think. To remove the bumper, you do not need to use any special tools, just a flat-head screwdriver. Position yourself on the right side of the bumper and insert the flat-head screwdriver at the bottom near the rear wheel. Gently push the clips outwards to release the side part of the bumper; repeat the same step on the left side before moving to the center and unhooking the bumper.

Posted on 4 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In the following article, we will analyze the procedure for disassembling and replacing the rear bumper of the Peugeot 308 T9. First, you need to rem…
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper of the Peugeot 308, you need to open the rear hatch and then loosen the screws that internally fix the two rear lights: onc…
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper from a Peugeot 308, start with the rear wheel arches: push the trim inward and unscrew the Torx screws present on both side…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos