Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

How do you remove the front bumper of a Peugeot 308? Follow these steps to disassemble the parts for removing the front bumper. Lift the front bonnet and locate the screws securing the bumper.

Raise the car on a jack to access the screws located under the bumper; using a plastic or metal lever, remove the securing rivets located at the top of the bumper. Once the rivets (screws) at the top are removed, take out the screws located in the wheel arch liners (remove the pins located at the bottom of the bumper).

Disconnect the electrical connectors from behind the bumper, then completely remove the piece.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Removing the Bumper on a Peugeot 308
Removing the Bumper on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Removing the bumper on a Peugeot 308. Removing the damaged bumper? Here’s how. Lift the car on a jack, unscrew the fastening screws located in the pl…
Removing the Front Bumper on a Peugeot 308
Removing the Front Bumper on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) How do you remove the front bumper from a Peugeot 308? This guide shows how to remove the bumper from your car. Lift the front bonnet of the car, loc…
How to remove the rear bumper of the Peugeot 308
How to remove the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The removal of the rear bumper on Peugeot 308 vehicles may seem like a difficult task to do independently, but on T 9 models it is easier than you mi…

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos