Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bracket of the Bumper on a Peugeot 308 (Without Removing the Bumper)

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

To replace the front bracket on a Peugeot 308 without completely removing the bumper, first, you need the help of a second person. Then, obtain the bracket, which can be found on eBay with the code 365813473149 for £45.99, with free delivery.

Detach the bumper only from the affected side (remove the screws under the bumper in the wheel arch area and along the top (under the bonnet); you do not need to remove everything, just create enough space to insert your hand and locate the bracket, which is inside the bumper, securing it to the bodywork.

It is held by a couple of Torx screws that fix the bracket to the bumper itself.

While your helper pulls the bumper outwards, slide out the old bracket and insert the new one, then reassemble everything, and you’re done.


Posted on 15 May 2026 by ScegliAuto


Related tutorials

How to replace the front bumper of the Peugeot 308 MK1
How to replace the front bumper of the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) In this video, we will see how to replace the front bumper of the Peugeot 308 MK1: we open the hood, and we see that on the top of the bumper, we hav…
Removing the Front Bumper on a Peugeot 308
Removing the Front Bumper on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) How do you remove the front bumper from a Peugeot 308? This guide shows how to remove the bumper from your car. Lift the front bonnet of the car, loc…
Removing the Front Bumper of a Peugeot 308
Removing the Front Bumper of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the front bumper of a Peugeot 308? Follow these steps to disassemble the parts for removing the front bumper. Lift the front bonnet…

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos