Do it yourself
Frequently asked questions about cars and motorcycles

Removal, Repair and Reinstallation of the Headlining on a Peugeot 308 CC

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Body

To remove, repair and reinstall the headlining on a Peugeot 308 CC, start by opening the roof halfway and unfastening the front joint along its entire length. Remove the clips from the headlining, push it outwards and lower it, remembering to disconnect the central light. Once removed, take off the side and central plastics (with clips) and detach the old fabric with a cutter, scraping away any glue residue. Clean the surface thoroughly with a brush and vacuum, then with acetone to remove any remaining traces; areas with extra strong glue should be scraped with a blade and finally sanded to smooth. Apply contact adhesive (heat-resistant) to both the new fabric (which can be found on eBay with code 262106738054 for £25.50 for a 2x1.5 m cut, available in various colours) and the backing, joining the two layers by applying pressure from the inside out. After gluing, cut the fabric leaving a margin for the folds, finish the edges and reopen the holes for the handles and light with a cutter. Reinstall the plastics, securing them with high-temperature hot glue. For reassembly in the car, lift the front joint, position the headlining aligning the black clips, bring the joint flush and reattach the clips at the front. The result is a perfectly taut and finished headlining.

Posted on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In order to replace the headliner of the Peugeot 308, you need to pry with an object to completely detach the door pillars; once these have been remo…
Peugeot 308 (2013-2021 / T9, MK 2) In a few simple steps, we will see how to remove and replace the sun visor from the roof lining of the Peugeot 308. First, get inside the vehicle and…
Peugeot 308 (2007-2014 / T7, MK 1) In order to open the convertible top of the Peugeot 308 CC, you need to go inside the cockpit and turn on the instrument panel, inserting the ignitio…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos