Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sun Visor on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

See other generations:
Video tutorial

In a few simple steps, we will see how to remove and replace the sun visor from the roof lining of the Peugeot 308. First, get inside the vehicle and start by unclipping the small plastic cap on the sun visor bracket; then pull down the bracket, unclipping it on the other side to remove the visor, as shown in the video.

At this point, carry out the repair or replacement of the sun visor, securing it properly to the roof lining on both sides, following the video tutorial to the end!


Posted on 14 June 2026 by ScegliAuto


Related tutorials

Disassembly of the sun visor of the Peugeot 308
Disassembly of the sun visor of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Below we will see the instructions that will allow us to disassemble and replace the sun visor of the Peugeot 308, in simple steps. First of all, we …
How to replace the sun visor of the Peugeot 308
How to replace the sun visor of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Replacing the left front sun visor is a simple and quick operation that can be done independently. Today we will see how to perform the steps on a Pe…
How to replace the headlining of the Peugeot 308?
How to replace the headlining of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the headlining of the Peugeot 308, use a tool to pry off the door pillar trims; once these are removed, you can proceed to detach the hand…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos