Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Bumper on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Front bumper

Removing the bumper on a Peugeot 308. Removing the damaged bumper? Here’s how. Lift the car on a jack, unscrew the fastening screws located in the plastic wheel arch liners. Remove the pins located at the bottom of the bumper. Unscrew the fastening screws at the top of the bumper using a socket wrench. Pull the bumper away from the bodywork by hand; carry out the necessary maintenance and refit the new bumper with all the attached parts. Connect the electrical terminals before mounting the bumper. Test any fog lights fitted.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the front bumper of a Peugeot 308? Follow these steps to disassemble the parts for removing the front bumper. Lift the front bonnet…
Peugeot 308 (2007-2014 / T7, MK 1) Today's video will show us how to disassemble and replace the front bumper of the Peugeot 308, following the instructions below. First, we open the h…
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear bumper from a Peugeot 308, start with the rear wheel arches: push the trim inward and unscrew the Torx screws present on both side…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos