Do it yourself
Frequently asked questions about cars and motorcycles

How to turn on the fog lights on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Fog lights

Let's see how to turn on the fog lights on the Peugeot 308: to turn on the fog lights, remember that first, the low beams must always be on. This operation is done with the lever located on the left side of the steering wheel. For the front fog lights, we must rotate the ring of the lever to the left, until the light on the dashboard turns on. For the rear fog lights, instead, we must rotate the same ring to the right, until the yellow light on the dashboard turns on. The rear fog lights are very powerful and should only be used in case of dense fog, to avoid unnecessarily dazzling those behind us.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In order to activate the fog lights of the Peugeot 308, you need to insert the ignition key into the corresponding slot: this way you can turn it to …
Peugeot 308 (2007-2014 / T7, MK 1) Replacing the left front fog light bulb on a Peugeot 308 is a straightforward task you can do yourself. First, remove the fog light cover by prying i…
Peugeot 308 (2013-2021 / T9, MK 2) The appropriate fuse boxes installed in the Peugeot 308 serve to hold the fuses that regulate the operation of the devices within the car: in this ty…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos