Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front bumper on a Peugeot 308 2014?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Front bumper

To remove the front bumper of a Peugeot 308, start by lowering the vehicle and removing the front wheels to facilitate access to the screws. Usually, there are screws to unscrew under the bumper, in the wheel arches, and above the front grille. Use a screwdriver or a ratchet wrench to unscrew them. After removing all the screws, pay attention to the hooks that secure the bumper to the bodywork, as they will need to be detached carefully. Once all the screws and hooks have been removed, lift the bumper and gently pull it towards you to detach it from the vehicle. If there are sensors or headlights, disconnect them before removing it completely. If you do not feel comfortable doing it yourself, contact a trusted workshop.

Posted on 9 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of the Peugeot 308
How to disassemble the rear bumper of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In the following article, we will analyze the procedure for disassembling and replacing the rear bumper of the Peugeot 308 T9. First, you need to rem…
How to Remove the Front Bumper of a Peugeot 308
How to Remove the Front Bumper of a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today's guide will illustrate the steps on how to remove and replace the front bumper of a Peugeot 308. First, open the vehicle's bonnet and start un…
Removing the Front Bumper of a Peugeot 308
Removing the Front Bumper of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the front bumper of a Peugeot 308? Follow these steps to disassemble the parts for removing the front bumper. Lift the front bonnet…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos