Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Bumper on the Peugeot 5008

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the front bumper on the Peugeot 5008, as well as the 3008. First, open the bonnet and start removing all the plastic clips located at the top of the bumper; then unscrew the fastening screws found on both sides of the front wheel arches and underneath the bumper, using a spanner or Torx screwdriver, as shown in the video.

Next, start detaching and removing the bumper from the sides until it is completely off; then replace it with the new one by applying the reverse procedure!


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) To remove the front bumper of the Peugeot 5008, open the bonnet to access the screws securing the bumper from the top; once these are undone, access …
Removing the Rear Bumper of the Peugeot 5008
Removing the Rear Bumper of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Below are the instructions on how to remove and replace the rear bumper of the Peugeot 5008. First, move to the rear of the vehicle and start unscrew…
How to Remove the Bumper and Front Headlight of the Peugeot 5008
How to Remove the Bumper and Front Headlight of the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) Today, learn how to remove the front bumper of the Peugeot 5008 to replace the front headlight. Open the front bonnet and using an 18 mm socket, undo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos