Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to change a tire on a Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Wheel
Operation: How to change a tire on a Peugeot 2008?

Today we will try to learn how to replace a tire on our Peugeot 2008. To do this, we will need the jack and wheel key that come with the tool kit. Before proceeding, make sure the vehicle is parked on a flat surface. Then, remove the hubcap and position the jack under the car near the tire. By rotating the lever, the side of the car will lift, allowing us to work on the tire to be replaced. Now we can proceed with removing the bolts that hold the tire in place. Once unscrewed, remove the tire and replace it with the new one. Then, tighten the bolts carefully to secure the replaced tire. Finally, lower the vehicle and put the tools back in the kit. Our car is now ready!


Posted on 15 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - How to change a wheel on a Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos