Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Wheel from a Peugeot

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Wheel

Before you can start, it is imperative to engage the handbrake and put the car in first gear, with the engine turned off. Once done, begin by lifting the car with the jack provided by the manufacturer. Next, remove the plastic covers from the bolts that secure the wheel using pliers or a similar tool. Once the bolts are exposed, you can unscrew and remove them using the appropriate tool provided by Peugeot. When all the bolts are removed, you can take off the wheel, successfully completing the removal.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Serpentine Belt on the Peugeot 2008 1.2
Replacing the Serpentine Belt on the Peugeot 2008 1.2
Peugeot 2008 (2013-2019 / MK 1) In this brief guide, we will go through the steps to remove and replace the serpentine belt on the Peugeot 2008 1.2. First, lift the vehicle and begi…
Guide to Replacing the Wheel of the Peugeot 2008
Guide to Replacing the Wheel of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Today, in this guide, we will look at the main instructions useful for removing and replacing the front wheel of the Peugeot 2008. First, open the bo…
How to Change a Wheel on a Peugeot 2008?
How to Change a Wheel on a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Today, learn how to replace a wheel on your Peugeot 2008. You will need the jack and wheel wrench found in the tool kit provided. Before proceeding, …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos