Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Guide to replacing the wheel of the Peugeot 2008.

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Wheel
Operation: Guide to replacing the wheel of the Peugeot 2008.

Today in this guide, we will see the main instructions for disassembling and replacing the front wheel of the Peugeot 2008. First of all, we open the rear hatch of the trunk and take out the entire wheel replacement kit, as well as the jack, the wrench, and the emergency triangle; then we also remove the spare wheel or the spare tire, as shown in the video. At this point, we loosen the wheel bolts with the wrench, raising the car to remove it; we replace the wheel with the spare one, fastening the bolts in a cross pattern, and then put everything back in the trunk compartment!


Posted on 9 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - How to change a wheel on a Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos