Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Peugeot 2008, lift the car so that the wheel corresponding to the pads to be removed is not in contact with the ground. Once the wheel is raised, loosen the bolts securing it and remove it from the hub. You can then access the brake caliper, which must be detached by unscrewing its bolts.

This will allow you to remove the pads inside and insert new ones. After installation, secure the caliper and refit the wheel.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Peugeot 2008?
How to Replace the Front Brake Pads on a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) .. In this tutorial, see how to replace the front brake pads on a Peugeot 2008, a simple operation but one that requires good.. …
How to Replace the Front Brake Pads on a Peugeot 2008
How to Replace the Front Brake Pads on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) .. In this video, you will learn how to replace the front brake pads on a Peugeot 2008: open the bonnet and the brake fluid reservoir... …
How to Replace the Brake Pads on a Peugeot 2008
How to Replace the Brake Pads on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The first step is to remove the wheel from the side where you want to replace the brake pads. You will also need to lift your vehicle using appropria…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos