Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to replace the brake pads of the Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Brake pads
Operation: How to replace the brake pads of the Peugeot 2008

The first operation obviously necessary for this type of processing will be to remove the wheel to which you want to replace the pads, therefore it will obviously also be necessary to lift your car on a special pedestal, then proceed by removing the bolts indicated on the rear part of the disc in this way you can extract the brake caliper and bring the piston to the start of the stroke. Using a screwdriver you can extract the now damaged tablet, and then proceed backwards to reassemble the components previously removed, making sure to replace all the pieces you find in the kit purchased.


Posted on 19 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos