Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Peugeot 2008 1.2 Puretech

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Timing belt

Let's see the steps on how to dismantle and replace the timing belt of the Peugeot 2008 1.2 Puretech. First of all, lift the vehicle and start dismantling and removing the right front wheel, also removing the wheel arch; then proceed to remove the V-belt and then the crankshaft pulley, as shown in the video. At this point, dismantle the engine support and remove the distribution cover; take the necessary references for the replacement of the timing belt, installing the original one. Finally, check the conditions of the oil pump and the tensioner, ensuring proper functioning.

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How and when to replace the timing belt on the Peugeot 2008 1.2
How and when to replace the timing belt on the Peugeot 2008 1.2
Peugeot 2008 (2013-2019 / MK 1) Today's guide will show you how and when to replace the timing belt on the Peugeot 2008 with a 1.2 petrol engine; the manufacturer states that the ti…
How to Replace the Timing Belt on a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Hello! Today, you will focus on replacing the timing belt on your Peugeot 2008. Start by positioning the car on a flat surface and ensure the engine …
Smelling burnt oil in the 1.2 Puretech engine? It might not be the belt
Smelling burnt oil in the 1.2 Puretech engine? It might not be the belt
Peugeot 2008 (2019-2026 / MK 2) The 1.2 PureTech engine (fitted in Peugeot 2008, 208, 308 and Citroën) is often associated with the oil-bath belt, but not all problems stem from the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos