Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the water pump of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Pump

The main instructions in this guide will show us how to disassemble and replace the water pump of the Peugeot 207. First, we open the car's engine hood and start disassembling and removing the engine support; then we remove the V-belt and the crankshaft pulley, also removing the distribution cover. At this point, we remove the timing belt and then the water pump, unscrewing the fixing screws; we replace the timing belt and the water pump kit with the new original components!

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Oil Pump Replacement for Peugeot 207 1.4 16V
Oil Pump Replacement for Peugeot 207 1.4 16V
Peugeot 207 (2006-2015 / MK 1) In this video, follow the main steps to remove and replace the oil pump of the Peugeot 207 1.4 16 valves, as well as the Citroen C3. First, lift the …
Guide to disassembling the alternator of the Peugeot 207 1.4 HDI
Guide to disassembling the alternator of the Peugeot 207 1.4 HDI
Peugeot 207 (2006-2015 / MK 1) Today's information will show us how to disassemble and replace the alternator of the Peugeot 207 1.4 HDI, in simple steps. First, we open the car's …
Guide to disassembling the dashboard of the Peugeot 207
Guide to disassembling the dashboard of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) The main steps outlined in this guide will show us how to disassemble the entire dashboard of the Peugeot 207, following the instructions below. Firs…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos