Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Auxiliary Belt on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: V-belt

In this tutorial, you will see how to replace the auxiliary belt on a Peugeot 207, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then open the bonnet and locate the tensioner indicated, positioned on the right side of the engine. Next, lift the same side of the vehicle, taking all necessary safety precautions, and remove both the wheel and the corresponding wheel arch. At this point, grasp the tensioner with a long 15mm socket wrench, move it towards the front of the vehicle to release the tension, and remove the belt from the pulleys. Similarly, you can install the replacement.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 207 (2006-2015 / MK 1) Access the auxiliary belt from the engine bonnet. Pull the tensioner pulley laterally, and when it is free, remove it from its housing, taking care o…
Peugeot 207 (2006-2015 / MK 1) The following information will illustrate how to remove and replace the timing belt on the Peugeot 207 1.6 HDI; the manufacturer states that on this …
Peugeot 207 (2006-2015 / MK 1) In order to replace the timing belt of the Peugeot 207, you need to loosen the screws that secure the right front wheel and the inner cover of the co…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos