Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Guide to replacing the timing belt of the Peugeot 207 1.6 HDI.

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Timing belt
Operation: Guide to replacing the timing belt of the Peugeot 207 1.6 HDI.

The following information will show us how to disassemble and replace the timing belt of the Peugeot 207 1.6 HDI; the manufacturer states that on this type of engine, the timing belt should be replaced every 180,000 kilometers. In order to access the timing belt, it will be necessary to lift the vehicle and remove the right front wheel; we disconnect the V-belt and remove the timing belt cover, as shown in the video. At this point, we remove the timing belt and replace it with the new original one, performing the correct engine timing!


Posted on 23 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to change the timing belt on a Peugeot 207? Read Answer
    • 207 2006-2015 - Cost of timing belt replacement on Peugeot 207? Read Answer
    • 207 2006-2015 - How often does the Peugeot 207 1.4 HDi timing belt need to be replaced? Read Answer
    • 207 2006-2015 - How much does it cost to replace the timing belt on the Peugeot 207 1.4 hdi? Read Answer
    • 207 2006-2015 - How many km do you change the timing belt of the Peugeot 207? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos