Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain of the Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Timing belt

In order to replace the timing chain of the Peugeot 207, you need to lift the car so that it is possible to completely remove the front right wheel: this will need to be removed along with the corresponding wheel arch. This way, you will have access to the side of the engine block, where the chain tensioner is located: by releasing it from its housing, you can reduce the tension of the chain, which can then be completely removed. After removal, you can insert the new chain so that it is tensioned again by reinserting the tensioner.

Posted on 5 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Oil Pump Replacement for Peugeot 207 1.4 16V
Oil Pump Replacement for Peugeot 207 1.4 16V
Peugeot 207 (2006-2015 / MK 1) In this video, follow the main steps to remove and replace the oil pump of the Peugeot 207 1.4 16 valves, as well as the Citroen C3. First, lift the …
How do you reset the sunroof of the Peugeot 207 cc?
How do you reset the sunroof of the Peugeot 207 cc?
Peugeot 207 (2006-2015 / MK 1) The convertible version of the Peugeot 207, namely the Peugeot 207 cc, could suddenly show electrical problems with the opening of the roof, which ca…
How do you replace the headlight bulb of the Peugeot 207?
How do you replace the headlight bulb of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) The procedure for replacing the headlight bulb of the Peugeot 207 involves opening the hood in order to access the components inside the engine compa…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos