Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the windscreen washer pump of the Peugeot 207.

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Pump
Operation: How to replace the windscreen washer pump of the Peugeot 207.

The steps outlined in this guide will show us how to disassemble and replace the windshield washer pump of the Peugeot 207. First, let's locate the windshield washer pump, which is located on the side of the wheel well. Then, disconnect the electrical connector and the windshield washer fluid tubing, as shown in the video. At this point, remove the small fluid pump, either repairing it or replacing it with a new one. Then, make the necessary connections, ensuring that they are in good condition. Finally, fill the designated reservoir in the engine compartment with the new windshield washer fluid.


Posted on 8 February 2024 by ScegliAuto

Other guides that may interest you

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos