Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Timing belt

In order to replace the timing belt of the Peugeot 2008, you need to loosen the screws that fix the front bumper so that it can be completely detached: after removal, you can proceed by also detaching the corresponding front fender. At this point, you can locate the belt on the side of the engine block: the belt can be removed from the pulleys after loosening the central nut of the tensioner roller. Once the old timing belt has been removed, you can insert the new one, making sure everything is functioning properly.

Posted on 14 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Hello! Today, you will focus on replacing the timing belt on your Peugeot 2008. Start by positioning the car on a flat surface and ensure the engine …
How and when to replace the timing belt on the Peugeot 2008 1.2
How and when to replace the timing belt on the Peugeot 2008 1.2
Peugeot 2008 (2013-2019 / MK 1) Today's guide will show you how and when to replace the timing belt on the Peugeot 2008 with a 1.2 petrol engine; the manufacturer states that the ti…
Guide to replacing the timing belt of the Peugeot 2008 1.2 Puretech
Guide to replacing the timing belt of the Peugeot 2008 1.2 Puretech
Peugeot 2008 (2019-2026 / MK 2) Let's see the steps on how to dismantle and replace the timing belt of the Peugeot 2008 1.2 Puretech. First of all, lift the vehicle and start disman…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos