Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to replace the glow plugs in a Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Glow plugs
Operation: How to replace the glow plugs in a Peugeot 2008?

In this tutorial, we can see how to replace the glow plugs in a Peugeot 2008, which is a relatively simple operation. First of all, make sure the engine is cold, then open the hood, disconnect the power connector, and remove both the battery and its support. Next, remove the entire filter box, disconnect the power connectors of the glow plugs, and clean any dirt residue on the cylinder head. At this point, take the faulty glow plug with the appropriate key, carefully unscrew it, and insert the replacement. Tighten it if possible using a torque wrench set to 14nm.


Posted on 5 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos