Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on a Peugeot 407 2.0 HDi

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Glow plugs

The instructions in this guide will illustrate the procedure for removing and replacing the glow plugs in the engine of a Peugeot 407 2.0 HDi. First, open the engine bonnet and disconnect the battery; then locate the glow plugs, situated at the rear of the engine block, as shown in the video. At this point, disconnect the wiring to remove the glow plugs using a socket spanner with an extension; replace the four glow plugs with new original ones, and reassemble everything!

Posted on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Peugeot 407 2.0 HDI
Guide to replacing the timing belt of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) The information provided below will show us how to disassemble and replace the timing belt of the Peugeot 407 2.0 HDI. In this case, we will see the …
How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
How to Bleed the Fuel System of the Peugeot 407 2.0 HDI
Peugeot 407 (2004-2012 / MK 1) Let’s briefly review the main steps to bleed the fuel system of the Peugeot 407 2.0 HDI if there is air present inside. First, open the bonnet of you…
Replace the Steering Rack Boot on Peugeot 407 1.6 HDI
Replace the Steering Rack Boot on Peugeot 407 1.6 HDI
Peugeot 407 (2004-2012 / MK 1) This video outlines the main steps to remove and replace the steering rack boot on a Peugeot 407 1.6 HDI. First, lift the vehicle, at least at the fr…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos