Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Cylinder Head on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Cylinder head

Below are the main instructions that will allow you to install the cylinder head on the engine block of the Peugeot 206. In this case, the installation of the cylinder head is carried out with the engine block removed from the chassis; after replacing the cylinder head gasket, insert it and secure it with all the screws. At this point, correctly adjust the valve clearance and camshaft, reassembling the timing belt and timing the engine; finally, reassemble the cylinder head cover with the new gasket, following the video tutorial to the end!

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cylinder Head from a Peugeot 206 1.4
How to Remove the Cylinder Head from a Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) This video tutorial shows how to remove the engine cylinder head and its gasket from a Peugeot 206 with a 1.4 petrol engine. First, open the bonnet a…
Guide to replacing the head gasket of the Peugeot 206 1.4
Guide to replacing the head gasket of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Today's guide will show us the main steps useful for disassembling and replacing the cylinder head gasket of the Peugeot 206 1.4. Firstly, we open th…
Replacing Injectors on Peugeot 206 1.4
Replacing Injectors on Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Are you experiencing issues with your vehicle? Want to remove the injectors from your Peugeot 206? Here’s how to do it. Lift the front bonnet and rem…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos