Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Peugeot 2008 1.2 Puretech

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Battery

Today, discover the procedure and instructions to remove and replace the battery in your Peugeot 2008 1.2 Puretech. First, open the bonnet of the vehicle and locate the battery, situated at the top right; then disconnect both battery terminals (positive and negative), as shown in the video. Next, undo the screw of the battery bracket found at the bottom, in order to remove it and replace it with the new one (with the same amperage); finally, reconnect the electrical connections and test the engine start.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Peugeot 2008 1.2 Puretech
Guide to replacing the timing belt of the Peugeot 2008 1.2 Puretech
Peugeot 2008 (2019-2026 / MK 2) Let's see the steps on how to dismantle and replace the timing belt of the Peugeot 2008 1.2 Puretech. First of all, lift the vehicle and start disman…
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Replacing the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) This video shows how to remove and replace the battery in a first-generation Peugeot 2008, following these simple steps. First, open the bonnet and r…
Battery replacement on Peugeot 2008
Battery replacement on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this tutorial you will see all the steps necessary to replace the battery on your Peugeot 2008 1.2 Puretech, first series model in production from…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos