Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Peugeot 2008 1.2 Puretech

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

This video shows how to remove and replace the battery in a first-generation Peugeot 2008, following these simple steps. First, open the bonnet and remove the clip found on the plastic cover above the bumper; this will release the air filter box, allowing you to remove it. Next, take off the plastic cover of the battery and unscrew the screws of the upper control unit using a socket spanner; now you can remove the top cover and access the terminals.

Finally, unscrew the two battery terminals and the bolt of the lower bracket; remove and replace the battery!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Peugeot 2008 1.2 Puretech
How to Replace the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) Today, discover the procedure and instructions to remove and replace the battery in your Peugeot 2008 1.2 Puretech. First, open the bonnet of the veh…
Guide to Replacing the Timing Belt on the Peugeot 2008 1.2 Puretech
Guide to Replacing the Timing Belt on the Peugeot 2008 1.2 Puretech
Peugeot 2008 (2019-2026 / MK 2) Here’s how to remove and replace the timing belt on the Peugeot 2008 1.2 Puretech. First, raise the vehicle and remove the front right wheel, also ta…
Battery Replacement on Peugeot 2008
Battery Replacement on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this tutorial, you will see all the necessary steps to replace the battery on your Peugeot 2008 1.2 Puretech, first series model produced from 201…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos