Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Air filter

To replace the engine air filter in your first-generation Peugeot 2008, you need to carefully read the following guide and follow the brief procedure step by step. First, ensure you have a T25 Torx key and, of course, a new air filter that is perfectly compatible with the car. At this point, lift the front bonnet and locate the box situated at the top of the engine compartment. Unscrew the cover screws with the Torx key and remove the cover. Finally, replace the old filter with the new one.

Posted on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the Peugeot 2008
How to replace the air filter on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the air filter of the Peugeot 2008 model 1 we need to: -open the front hood; -cover the exterior body with a cloth; -disconnect the electr…
How to Remove the Engine Air Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) How to remove the engine air filter on a Peugeot 2008. Open the car door, pull up the lever to open the engine compartment located at the bottom left…
How to replace the cabin air filter of the Peugeot 2008.
How to replace the cabin air filter of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos