Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see all the necessary steps to replace the battery on your Peugeot 2008 1.2 Puretech, first series model produced from 2013 to 2019. Start by opening the engine bonnet and locating the battery on your right. Using a 10mm socket spanner, remove the negative terminal first, followed by the positive terminal of the battery.

Next, remove the wiring panel on the right and then take out the plastic clips securing the base of the battery as shown in the video. Proceed to remove the old battery and finally fit a new one by following the reverse procedure.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Peugeot 2008 1.2 Puretech
How to Replace the Battery in a Peugeot 2008 1.2 Puretech
Peugeot 2008 (2013-2019 / MK 1) Today, discover the procedure and instructions to remove and replace the battery in your Peugeot 2008 1.2 Puretech. First, open the bonnet of the veh…
Where to Find the Fuses on the Peugeot 2008
Where to Find the Fuses on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) If you need to work on the various fuses of your Peugeot 2008 but do not know where they are located, just follow the steps described in this guide. …
How to replace an ignition coil on a Peugeot 2008
How to replace an ignition coil on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Let's see how to replace an ignition coil on a Peugeot 2008: start by disconnecting the negative terminal of the battery, remove the engine cover. Lo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos