Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace an ignition coil on a Peugeot 2008

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Ignition coil

See other generations:
Video tutorial

Let's see how to replace an ignition coil on a Peugeot 2008: start by disconnecting the negative terminal of the battery, remove the engine cover. Locate the ignition coil to be replaced (a black plastic component with an attached electrical connector, from which the spark plug wires originate); press the release lever on the connector and disconnect it from the coil; unscrew the bolts that secure the coil to the base and pull it upwards.

You can find the coils on auto-doc. It with the EAN code 4059191989690 at a price of 22.49 euros each + 9.95 euros for delivery: take it and apply a thin layer of dielectric grease on the bottom of the stem: Insert it and tighten the two fixing bolts, without over-tightening.

Reconnect the electrical connector, reassemble the engine cover and reconnect the negative battery terminal.


Posted on 16 October 2025 by ScegliAuto


Related tutorials

How to Reprogram the Remote on Peugeot 2008
How to Reprogram the Remote on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) On the Peugeot 2008 and many other recent Peugeot and Citroën models, it is likely that after replacing the battery, the remote will stop working. Th…
Reset Service Light on Peugeot 2008
Reset Service Light on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Let's see how to reset the maintenance light on a Peugeot 2008. Enter the vehicle and turn on the ignition, locate the light that needs resetting, an…
How to Reset the Service Light on the Peugeot 2008 2014
How to Reset the Service Light on the Peugeot 2008 2014
Peugeot 2008 (2013-2019 / MK 1) The manual reset of the service light on your first-generation Peugeot 2008 (2014 model year) can be completed in just ten seconds. Simply follow the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos