Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the Remote on Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Key

On the Peugeot 2008 and many other recent Peugeot and Citroën models, it is likely that after replacing the battery, the remote will stop working. This is because the internal chip is reset, and reprogramming will be necessary. First, sit in the driver's seat of the vehicle and insert the key into the ignition. Then, while holding down the lock button on the key, turn on the ignition without releasing the lock button for five seconds. After five seconds, you can turn off the ignition, release the lock button, and test the remote's functionality.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Peugeot 2008 Remote
How to Replace the Battery in a Peugeot 2008 Remote
Peugeot 2008 (2013-2019 / MK 1) How to replace the (flat or corroded) battery in the key remote of a Peugeot 2008? Here's how to proceed: take your remote and use a screwdriver to p…
Starting a Peugeot 2008 with a Flat Remote Battery
Starting a Peugeot 2008 with a Flat Remote Battery
Peugeot 2008 (2019-2026 / MK 2) If the battery in the remote control for the Peugeot 2008 runs flat and you cannot replace it, follow this procedure to access the cabin and start th…
How to Change the Key Fob Battery on a Peugeot 2008
How to Change the Key Fob Battery on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To replace the battery in a Peugeot 2008 key fob, locate the small groove on the side or edge of the fob. Insert a plastic tool or a small flathead s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos