Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition coil of the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Ignition coil

See other generations:
Video tutorial

In this video, we will see how to replace the ignition coil of the Peugeot 308: we start by opening the front hood and disconnecting the ignition coil plug, disconnecting the connector and then removing the coil from its housing, which we will clean well from dust and debris before putting the new piece in its place, which we may have obtained, for example, on auto-doc. It with the code 4059191799503 at the price of 19.65 euros + 9.90 euros for shipping (always carefully check the compatibility of the piece with your car). We install the new coil in its place - it should make a noticeable "click" - connect the electrical connectors and it's done.


Posted on 18 January 2025 by ScegliAuto


Related tutorials

How to Change the Ignition Coil on a Peugeot 308
How to Change the Ignition Coil on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video, see how to change the ignition coil on a Peugeot 308: first, disconnect the ignition coil plugs, and then the connector of the coil it…
How to Program the Key of the Peugeot 308
How to Program the Key of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today's video will show you the necessary instructions for programming the ignition key of the Peugeot 308. First, get inside the vehicle and connect…
How do you reset the radio of the Peugeot 308?
How do you reset the radio of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To reset the Peugeot 308 car radio, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the pane…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos