Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Ignition Coil on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Ignition coil

See other generations:
Video tutorial

In this video, see how to change the ignition coil on a Peugeot 308: first, disconnect the ignition coil plugs, and then the connector of the coil itself. It is advisable to use a specific extractor for ignition coils: you can find it on Amazon with code B09LPCNB1J for £12.99, with free delivery for Prime customers.

Lift the coil out of the spark plug well, then remove dirt, dust, and debris from inside the spark plug well. You will find the new coil on Amazon with code B004AG9ILM for £25.45, with free delivery for Prime customers.

Install the new coil in the well, ensuring it is in position by the click that indicates it. Spray the coil connector with electronic spray, which will protect the connector from corrosion; reconnect the connector, securing it with its lock, and you’re finished.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to replace the ignition coil of the Peugeot 308
How to replace the ignition coil of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video, we will see how to replace the ignition coil of the Peugeot 308: we start by opening the front hood and disconnecting the ignition coi…
How to Program the Key of the Peugeot 308
How to Program the Key of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today's video will show you the necessary instructions for programming the ignition key of the Peugeot 308. First, get inside the vehicle and connect…
How to Change the Key Battery on a Peugeot 308
How to Change the Key Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Want to change the battery in your Peugeot key? Let’s see how to change the key battery on a Peugeot 308. Take your remote key and, using a screwdriv…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos