Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition coil on a Peugeot 207.

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Ignition coil

In this video, we will see how to replace the ignition coil on a Peugeot 207: we open the hood and remove the engine cover, then we disconnect the electrical connector from the coil and take it out. We clean the housing well with a small vacuum (not with compressed air, as it could damage the part). We can find them, for example, on AliExpress with the code 1005006603058833 at a price of 21.82 euros for a kit of 4 pieces, with free shipping. We place the new coil in its position and then reconnect the connector. We repeat the operation for the other three coils in sequence, then we put the engine cover back in place, and the operation is complete.

Posted on 29 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ignition coil on a Peugeot 207
How to replace the ignition coil on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video we see how to replace the ignition coil of a Peugeot 207: we start by opening the cover of the engine block; lift the safety of the ele…
Replacing Spark Plugs on a Peugeot 207
Replacing Spark Plugs on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the spark plugs on a Peugeot 207. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Use a socket wrench t…
How to reset the maintenance light on the Peugeot 207
How to reset the maintenance light on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In today's article, we are going to see how to reset the maintenance light of the Peugeot 207 in case it remains on after having had the service done…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos