Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the ECU of the Peugeot 407?

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Control unit

Video tutorial

The ECU of the Peugeot 407, which is the electronic control unit managing the entire operation of the vehicle, is located, as can be seen in the video, in the engine compartment, above the engine, in the central part, impossible to miss. If it stores one or more faults, even though everything is functioning perfectly, it is advisable to carry out a procedure to reset it completely, which is easy and DIY. We need to disconnect the negative terminal of the 12-volt battery that powers the car, wait fifteen seconds, and reconnect it. Now start the engine and check if the warning lights are still active.


Posted on 12 October 2026 by ScegliAuto


Related tutorials

How to reset the BSI unit of the Peugeot 407?
How to reset the BSI unit of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To reset the BSI unit of the Peugeot 407, connect a diagnostic tool to the vehicle's OBD port, which is located at the lower left part of the dashboa…
How to Remove the BSI from a Peugeot 407
How to Remove the BSI from a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this video, see how to remove the BSI from a Peugeot 407: BSI stands for Body System Interface, which is the control unit that acts as the electro…
How do you reset the BSI in the Peugeot 407?
How do you reset the BSI in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The BSI (Body System Interface) is nothing more than the electronic control unit that controls all the functions of the car, in this case the Peugeot…

Other guides you may be interested in

Location of the Jack and Spare Wheel of the Toyota Yaris

In the unfortunate event that one of the wheels of the Toyota Yaris is punctured, it is useful to know the location of the lifting jack, the spare wheel, the tool to operate the jack, and to unscrew the wheel bolts. The jack is located under the driver's seat, secured to a bracket and protected by a plastic cover, which you can remove by acting on the fixing clips. The spare wheel is located under the floor panel of the boot, secured to the floor by a threaded plastic flange, alongside which you will find the tool, consisting of a bent bar, which is used to operate the jack on one side and to remove the wheel on the other.

Watch the video!


by ScegliAuto

More videos