Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the BSI from a Peugeot 407

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Control unit

In this video, we can see how to remove the BSI from a Peugeot 407: BSI stands for Body System Interface, which is the control unit that acts as the electronic brain of the car and ensures the correct functioning of a multitude of features. It is located inside the panel where the fuses are located, inside the passenger compartment, exactly below them. Many electrical connectors are connected to the control unit, so we recommend taking a picture before removing them, so that you can be sure to put them back in the correct way. Once this is done, you have the control unit in your hand to do the work you want.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BSI unit of the Peugeot 407?
How to reset the BSI unit of the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To reset the BSI unit of the Peugeot 407, connect a diagnostic tool to the vehicle's OBD port, which is located at the lower left part of the dashboa…
How to remove the BSI from a Peugeot 407 or 307
How to remove the BSI from a Peugeot 407 or 307
Peugeot 407 (2004-2012 / MK 1) In this video we can see how to remove the BSI unit from a Peugeot 407 (or 307) but also from a Citroen C4/C5: to do this we will have to remove the …
How do you reset the BSI in the Peugeot 407?
How do you reset the BSI in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) The BSI (Body System Interface) is nothing more than the electronic control unit that controls all the functions of the car, in this case the Peugeot…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos