Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 407
    4. : How to reset the peugeot 407 service light

Peugeot 407 - Video tutorial

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Instrument cluster
Operation: How to reset the peugeot 407 service light

If you want to manually reset the service warning light that comes on on the instrument panel of your Peugeot 407, all you have to do is carry out the following steps. First, go inside the car and make sure all doors are closed. Then locate the button located under the speedometer and hold it down. Simultaneously insert the key and start the instrument panel. At this point a short automatic countdown will start. Wait for it to end and switch off the ignition at the end of the manual service warning light reset procedure.


Posted on 4 December 2022 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 407 2004-2012 - What does the yellow engine warning light on the Peugeot 407 indicate? Read Answer
    • 407 2004-2012 - What does the red engine light on the Peugeot 407 mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos