Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air filter replacement on Peugeot 2008 MK2

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Air filter

To replace the air filter that feeds the engine of the Peugeot 2008, we open the front hood and lock it with its rod. We remove the plastic cover in the center of the engine, remove the small tube in the center of the filter cover, detach the tube from the support above the intake tube and detach the latter from the cover. Using a Torx key, we unscrew the two screws that lock the cover, unclip the clip on the left side and remove it, remove the old filter and the foam support. We clean the compartment with a vacuum cleaner, insert the new support and then the new filter, close the cover, insert the tubes and put back the cover.

Posted on 5 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Peugeot 2008.
How to replace the cabin air filter of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …
How to Change the Air Filter on the Peugeot 2008?
How to Change the Air Filter on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) The air filter of the Peugeot 2008 is located at the top of the engine compartment, just below the windscreen. To replace it, you only need a screwdr…
How to replace the cabin air filter of the Peugeot 2008
How to replace the cabin air filter of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) The cabin air filter in your Peugeot 2008 needs to be replaced periodically to ensure optimal air quality while using the air conditioning. Below, we…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos