Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin air filter of the Peugeot 2008

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

If you want to continue to have optimal air quality inside the cabin of your second series Peugeot 2008, you must necessarily replace the appropriate air filter by following all the steps described in our new guide. First of all, reach the front passenger seat and shift your attention to the lower area of the glove compartment.

Then remove the small safety caps and then remove the plastic cover on the left side. Finally, locate the air filter box and proceed with the replacement of the filter.


Posted on 13 February 2025 by ScegliAuto


Related tutorials

Peugeot 2008 (2019-2026 / MK 2) Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …
Peugeot 2008 (2013-2019 / MK 1) Replacing the cabin air filter or pollen filter on a Peugeot 2008 mk1 is easier than ever. Thanks to our video guide, you can replace the filter inde…
Peugeot 2008 (2019-2026 / MK 2) The cabin air filter in your Peugeot 2008 should be replaced periodically to ensure optimal air quality while using the air conditioning. Below are t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos