Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air conditioning filter in a Peugeot 2008?

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

The air conditioning filter must be replaced according to the instructions provided by the vehicle manufacturer to ensure optimal air quality. In the second series Peugeot 2008, this filter should be replaced as follows: use a forked lever to remove the clips from the trim panels located under the glove compartment on the passenger side and on the right side of the centre tunnel, remove the fixing screw for the cover of the housing for the aforementioned filter, and finally extract the old filter, replacing it with a new one.


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Peugeot 2008
How to replace the cabin air filter of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) The cabin air filter in your Peugeot 2008 needs to be replaced periodically to ensure optimal air quality while using the air conditioning. Below, we…
How to replace the cabin air filter of the Peugeot 2008.
How to replace the cabin air filter of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Replacing the cabin air filter in your second-generation Peugeot 2008 is not difficult. If you want to carry out the operation safely and correctly, …
How to Replace the Air Filter on a Peugeot 2008
How to Replace the Air Filter on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the air filter on a Peugeot 2008 model 1, you need to: - open the front bonnet; - cover the external bodywork with a cloth; - disconnect t…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos