Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Compressor on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air conditioning

See other generations:
Video tutorial

Today's instructions will guide us through the main steps to remove and replace the air conditioning compressor on the Peugeot 308. First, open the bonnet of the car and start by disconnecting the serpentine belt; then unscrew the mounting bolts of the air conditioning compressor (accessing from underneath as well), and disconnect the electrical wiring to remove it, as shown in the video.

At this point, replace the air conditioning compressor with the new one, as well as the original; finally, reinstall the belt and check the proper functioning of the air conditioning!


Updated on 30 January 2026 by ScegliAuto


Related tutorials

How to Remove and Repair the Climate Control Buttons on the Peugeot 308
How to Remove and Repair the Climate Control Buttons on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This video provides instructions for removing and repairing the climate control buttons on the Peugeot 308. First, get into the vehicle and remove th…
How to Replace the Engine Air Filter on the Peugeot 308
How to Replace the Engine Air Filter on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) If the engine of your Peugeot 308 often overheats abnormally, even at low revs, it is time to replace the old air filter with a new one that is perfe…
Where is the OBD port of the Peugeot 308 located?
Where is the OBD port of the Peugeot 308 located?
Peugeot 308 (2007-2014 / T7, MK 1) If you own a first edition Peugeot 308 and want to locate the OBD port inside the car by yourself, all you have to do is read the following procedure…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos