Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the EGR valve on Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: EGR valve

See other generations:
Video tutorial

Let's see how to replace the EGR valve on a Peugeot Boxer that gives us a slow response from the accelerator, especially when releasing and pressing the pedal. First, we remove the engine undertray to access it from below.

The EGR valve is located at the rear of the engine, behind the radiator fans. We disconnect the electrical connector of the valve, unscrew the two bolts that secure the valve to the engine exhaust manifold, and also those that secure it on the other side to the gas return pipe.

We take the opportunity to clean and check the sensors that have been contaminated, such as the MAF sensor that we will clean with a specific spray, and the MAP sensor that is mounted near the EGR pipe and is prone to getting dirty. A new original Peugeot valve can be very expensive, but used ones in excellent condition can be found online.

Install the new valve, reassemble the cleaned MAF, reconnect all electrical connectors, and restart the engine. It will be necessary to use a diagnostic tool to clear the error codes.


Posted on 1 October 2025 by ScegliAuto


Related tutorials

How do you replace the EGR valve of the Peugeot Boxer?
How do you replace the EGR valve of the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In order to replace the EGR valve of the Peugeot Boxer, you will need to open the hood to access the components located inside the engine compartment…
How to Replace the EGR Valve on the Peugeot Boxer
How to Replace the EGR Valve on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To replace the EGR valve on the Peugeot Boxer, loosen the screws securing the front bumper at the front of the vehicle so that the bumper can be comp…
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Removing the EGR Valve on a Peugeot Boxer - Fiat Ducato 2.2 Diesel
Peugeot Boxer (2006-2024 / MK 2) In this video, we will see how to remove the EGR valve on a Peugeot Boxer 2.2 HDI, as well as on a Fiat Ducato with the same engine. First, open the …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos