Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the MAF sensor on the Opel/Vauxhall Corsa D

Model: Vauxhall Corsa - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: MAF sensor

See other generations:
Video tutorial

On the Opel/Vauxhall Corsa D, the MAF sensor is located in the engine bay, on the intake pipe, just after the air filter. It is easily recognisable as it has an electrical connector attached and is secured with two Torx screws.

Here you have two options: replace only the sensor (Amazon code B0FH2341JC at a price of £29.99 with free delivery for Prime customers) and you will need to remove the yellow tab under the connector, unlock it, and remove it, then take out the two securing screws, remove the sensor, and install the new one in its place.

Tighten the two screws and reconnect the electrical connector.

If you are replacing the entire body (auto-doc. It EAN code 4059191155132 at a price of £25.49 + £9.95 shipping), then you must remove the electrical connector, use a 7mm socket to loosen the two metal clamps securing the body to the intake pipe, disconnect the MAF body, install the new body, ensuring the airflow direction is correct.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

Replacing the External Temperature Sensor on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video, learn how to remove and replace the external temperature sensor on the Opel Corsa D, following the instructions below. First, locate t…
How to Replace the Oil Pressure Sensor on the Opel Corsa
How to Replace the Oil Pressure Sensor on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the oil pressure sensor on the Opel Corsa, start by opening the bonnet. Go to the left side of the upper engine cover, at the bottom, and …
Replacing the ABS Sensor on an Opel Corsa
Replacing the ABS Sensor on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this guide, you will discover step-by-step instructions to remove and replace the ABS sensor on an Opel Corsa. First, lift the vehicle and start b…

Other guides you may be interested in

How to Fix Code 84 Issue on the Chevrolet Cruze

In this video, you will see how to resolve the Code 84 issue when it appears on the instrument panel of the Chevrolet Cruze. The YouTuber uses an OBDII scanner connected to the EOBD port to correctly decode the error, which relates to the accelerator pedal that does not respond during engine acceleration. The solution is to check the throttle body, which helps send fuel to accelerate the vehicle; it was indeed damaged, and once replaced, the error code is cleared, allowing the vehicle to accelerate normally again.

Watch the video!


by ScegliAuto

More videos