Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Temperature Sensor on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014

In this video, learn how to remove and replace the external temperature sensor on the Opel Corsa D, following the instructions below. First, locate the position of the temperature sensor, which is found at the front of the vehicle (behind the front bumper grille); then use a pair of pointed pliers to detach the sensor, disconnecting it from its electrical connector, as illustrated in the video. At this point, replace the temperature sensor with the new one, using the original spare part; connect it and check its operation!

Updated on 6 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the External Temperature Sensor from an Opel Corsa
Removing the External Temperature Sensor from an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, you will see the main steps to remove the external temperature sensor from an Opel Corsa C. This part is replaced when it can…
How to Replace the Coolant Temperature Sensor on the Opel Corsa?
How to Replace the Coolant Temperature Sensor on the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, you will see how to replace the coolant temperature sensor on the Opel Corsa, a very simple and quick operation. First, ensure that…
Where is the Coolant Temperature Sensor Located on an Opel Corsa?
Where is the Coolant Temperature Sensor Located on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, you will see how to replace the coolant temperature sensor on an Opel Corsa, an extremely simple and quick operation. Before procee…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos