Do it yourself
| ||||
|
Vauxhall Corsa - Video tutorial
Model: Vauxhall Corsa
Corsa C
- Years 2000-2006 In this video tutorial we will see the main steps to be able to disassemble the external temperature sensor of an Opel Corsa C: this piece is replaced as it is no longer able to report the temperature value, or when it gives a completely wrong value: let's go to see how the replacement is performed! First we open and lift the car's engine hood and we go to disconnect our sensor from its electrical connector, as shown in the video. At this point let's replace it with the new one and check the external temperature from the display inside the car.
Posted on 26 December 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |